June 13th, 2010 by gumi | 2 Comments
Here are five demos of the new & expanded Kawai R-100 bends. The recordings were made using an R-100 with all three voice ROMs. What you hear is straight from the individual outs and new synth out. I will post documentation later. I Would Eat Insects: Features ROM bends, DAC bends, pitch modulation, and synth [...]
June 11th, 2010 by gumi | No Comments
Kritter Litter: Glitching the Kritter’s Keyboard via the on-board crystal oscillator. Squeak Farm: Again glitching the Kritter’s Keyboard via the on-board crystal oscillator, but this time with the pitch turned up.
June 8th, 2010 by gumi | No Comments
Milli-on: The Gumi modified CR-8000 was used in a recent round of studio sketches by Electrodactyl. In addition to the Gumi CR-8000, this track features a Juno 60 and a Sequential Circuits MultiTrak. The cricket sound was produced by velocity programming the Rim Shot. Bench Test: This is the test track I recorded from the [...]
June 7th, 2010 by gumi | No Comments
Here are a few recordings of the Gumi modified Roland TR-505. Each track used IC1, IC11, and R39 exclusively. The pitch modulation is handled by IC1, which drives an LED at different rates. The LED shines onto a CDS cell, which then changes the resistance at R39 as it flashes. “Synthefive” features the synth tones [...]